G3N – Narrow Limited Space Leveler

G3N Header

The G3N is a specialty leveler typically built for existing coil to coil lines where there is limited space available. It is available as either a lift out or slide out design so the leveler can be removed from the line for cleaning and service.


  • Automatic self-calibration after roll grind or parts replacement
  • Automatic setup based on material parameters
  • Floating journals reduce journal bearing load for longer life and better roll bend control
  • Overload protection via drive load monitoring and hydraulic relief
  • Automatic journal bearing lube system
  • Hanging bolster design eliminates adjustment backlash and reduces machine deflection
  • Open bypass mode lowers lower work rolls and raises upper work rolls away from pass line. Used for coil to coil applications when leveler is not in use to prevent scuffing from strip
  • Work roll modules can be removed as sub-assembly for cleaning and service

Frame and Roll Sizes

  • Frame sizes: 40,000 lb. up to 80,000 lb. separating load
  • Widths: 36” to 84”
  • Roll sizes: 0.875”, 1.3”, 1.5”, 1.75”
  • Typical max gauge: Approximately 0.100” for largest roll size depending on material width and yield strength

Optional Features

  • Pull thru only – no drive available Optional Features
  • Slide out cassette after leveler is removed from line
  • Off-line lifting bale and upper cassette rotator for easy cleaning and service of cassette
  • Patented roll cleaning process to quickly and easily scrub work rolls between coils
  • Lateral tilt to compensate for differences in material properties from edge to edge
  • AutoFlat® automatic shape control system
  • Job and product recipe storage